Scary Carriage by Kathi F. Rerek

INSTRUCTIONS
  1. Stamp image onto white paper and onto label paper.
  2. Fussy-cut the label paper version and place it onto its counterpart to mask the image.
  3. Place the image panel onto the STAY-tion and secure with magnets.
  4. Place the magnetic ruler over the base of the image (under the carriage and the horse) and sponge Chipped Sapphire and Blueprint Sketch Distress ink over the image.
  5. Move the ruler to cover the top of the image and sponge Pumice Stone and Distress inks over the base of the image.
  6. Remove the image panel from the STAY-tion. Lift the masks and reserve for another use.
  7. Color the image with Copic markers.
  8. Touch up any areas of the background with B63, B66, and N markers.
  9. Trim image panel and mat with black cardstock cut slightly larger than the image panel.
  10. Cut mixed media to 6" and secure to the stamping platform with magnets
  11. Position the Cling Crackle stamp as desired, press the cover of the stamp platform onto the cling, and lift.
  12. Ink the stamp with black ink and stamp.
  13. Remove the image panel from the platform and secure it to the STAY-tion with magnets.
  14. Place the matted image panel over the stamped panel, determine where the horizon falls, and place the magnetic ruler there.
  15. Sponge Blueprint Sketch and Chipped Sapphire Distress inks over the top section.
  16. Move the ruler and sponge Black Soot Distress ink over the bottom section. 
  17. Randomly drip Black Soot re-inker to mimic blotches on the stamp.
  18. Trim this panel to 6" square and edge the entire piece with Black Soot Distress ink.
  19. Thoroughtly heat set.
  20. Drag the VersaMark ink pad along the edges of the panel and add Aged Bronze Frantage Embossing Enamel. Dump off excess, and heat set. Repeat if necessary.
  21. Adhere this panel to a 6" square card.
  22. Align the horizon of the matted image panel to the horizon of the card front and adhere.
Print Project

Supplies

Also uses these supplies:

Copic® Markers Used:

   Carriage: YR12, YR14, YR16, YR18, E44, E47, E49

   Curtains, Groom's Robes, and Harness: V93, V95, V97

   Sconces and Brasswork: Y000, Y21,  Y23, Y26, Y28

   Wheels, Carriage Seat, Yoke: E23, E25 E27

   Lady Passenger: YG21, FYG2,  YR31, FY1, FYG2, FBG2

   Horse: T1, T2, T4, T5

Chipped Sapphire, Blueprint Sketch, Black Soot, and Pumice Stone Distress® Ink by Tim Holtz® for Ranger Industries

Removable ID Labels by Avery®
STAY-tion™ by Wendy Vecchi for Ranger Industries
Stamping Platform.

If you've use this product in a project of yours, we'd love to see it! You can submit your step-by-step instructions and supplies used by clicking below.

Submit A Project